SlipTech is CQVS's release foam for hot mix asphalt and tar sealing, a truck slip agent for road crews, packed in 200 L drums and 1,000 L IBCs.
What it does
Hot mix that sticks in a truck body or on equipment costs time to dig out and leaves a mess to clean. SlipTech is a release foam made to stop that, and its SDS names hot mix and tar sealing as the identified uses. It is a blend of surfactants (cocamide diethanolamide and sodium C12 to C14 alkyl ether sulfate, each under 10 per cent, and diethanolamine under 1 per cent), with the balance non hazardous ingredients. As supplied it is a clear to turbid pinkish liquid with a pH of 7.80 and a relative density of 1.02, and it mixes fully with water.
Where to use it
Hot mix asphalt and tar sealing work, on the surfaces that carry or touch the mix. For concrete formwork rather than asphalt, see Lanotec Release Agent Concentrate. More in release agents.
How to use
- Put on chemical goggles, PVC gloves and protective clothing.
- Check the surface material first (see below).
- Apply SlipTech to the surfaces the hot mix will touch before loading.
- Ask us for the application rate and equipment that suit your plant; the SDS does not give one.
- Wash exposed skin after use and launder work clothes separately.
Safe on / avoid
The SDS storage section says the diethanolamine in it attacks aluminium, copper, zinc, their alloys and galvanised iron. Keep it in polyethylene or polypropylene packs, and talk to us before using it on aluminium or galvanised bodies. Keep it away from strong acids and oxidisers, and keep spills and wash water out of drains. Read the Safety Data Sheet before use.
Specifications
| Property | Value |
|---|---|
| Appearance | Clear/turbid pinkish liquid |
| pH | 7.80 (as supplied) |
| Specific gravity | 1.02 |
| Solubility in water | Miscible |
| Dangerous goods | Not regulated |
| Poisons schedule | Not scheduled |
Pack sizes and delivery
200L Drum and 1000L IBC. Freight is quoted to your postcode at checkout.
▸What is a truck slip agent?
A release product put on surfaces that carry hot mix so the asphalt lets go cleanly. SlipTech is a release foam made for hot mix and tar sealing.
▸Does SlipTech work for tar sealing as well as hot mix?
Yes. Its SDS names both hot mix and tar sealing as the identified use.
▸Can I use SlipTech on aluminium tipper bodies?
Check with us first. The SDS says its diethanolamine content attacks aluminium, copper, zinc and galvanised iron.
▸What application rate should I use?
Contact us with your plant and equipment details. The rate is not published on the SDS.
WARNING Causes serious eye irritation (H319).
- PPE: Chemical goggles to AS/NZS 1337.1, PVC gloves and protective clothing. Wash all exposed skin after handling, and keep an eye wash unit on hand.
- Handling and storage: Avoid all personal contact, use in a well ventilated area, and do not eat, drink or smoke while handling. Keep containers sealed, labelled and undamaged, in polyethylene or polypropylene, away from copper, aluminium, zinc, their alloys, galvanised iron, strong acids and oxidisers. Launder work clothes before reuse.
- First aid: Eyes: wash out at once with fresh running water, holding the lids apart, and see a doctor without delay. Skin: remove soiled clothing and footwear and flush with water and soap. Swallowed: do not make the person vomit; rinse the mouth, give water slowly and get medical help. Poisons Information Centre 13 11 26.
- Spills: Clean up straight away, contain with sand, earth or vermiculite, and keep it out of drains and water courses.
- Dangerous goods: Not regulated for transport.
- Poisons schedule: Not scheduled.
- SDS: Safety Data Sheet dated 20 May 2025 attached to this page.
SlipTech Asphalt Release Agent
Pricing by Packaging Size
Earns a loyalty stamp
Order this product in 1000L IBC to earn 1 stamp. Collect 10 stamps for a free IBC of TW Standard, TW Premium, or Eco Wash.
Packaging Size
Quantity
Delivery Information
Estimated dispatch: 7 business days after you order.
Freight is quoted to your postcode at checkout before you pay, with an estimated delivery date where the carrier gives one.
Reviews
What buyers say
No reviews yet - be the first.
Once a buyer leaves a review for SlipTech Asphalt Release Agent, it’ll appear here.
You might also like
Similar products from our catalog
