Back to Products
Lanotec Release Agent Concentrate - Release Agents - Lanotec - Image 1
1 / 2
Description

Lanotec Release Agent Concentrate is a lanolin form release you mix on site for concrete formwork and precast, sold from 2.9 L packs to 1,000 L IBCs.

What it does

The concentrate combines lanolin, an evaporative carrier and surfactant, and mixes with water on site. Sprayed onto the form face it stops concrete bonding, keeps panel suction low, resists rain wash off and protects fittings. Lanotec says the film degrades during curing, so the concrete needs no chemical clean before a coating goes on. AS 1580.408 adhesion tests found no coating failure at the concrete interface.

Where to use it

Form faces of steel, timber, plywood, PVC, rubber, plastic or fibreglass, precast and bullnose moulds, tilt panel bond breaking, scaffolding jacks and fittings, and machinery near wet concrete. On site tests at Fiona Stanley Hospital in WA found it compatible with the waterproofing membrane (Lanotec project report). Lanotec's Lano-Form is the ready to use version; for hot mix asphalt, see SlipTech. Browse release agents.

How to use

JobConcentrate to water
Formwork, precast and tilt panel1:6
Scaffolding, jacks and fittings1:4
  1. Stir or shake the concentrate until even.
  2. Add the concentrate to the container first, then the water.
  3. Apply a fine, even coat to a clean, dry surface with a good sprayer.
  4. Rinse the sprayer with plain water, and use any mix within 2 days.
  5. For bond breaking, two coats on crossing diagonals, wetting the panel first in extreme heat.

Safe on / avoid

Lanotec rates it non staining on coloured concrete, and set polystyrene block outs are unaffected. It is combustible and irritates eyes, so wear eye protection when spraying. Read the Safety Data Sheet before use.

Specifications

PropertyValue
ColourBrown
Specific gravity0.86 to 0.88 g/ml
Flash point>75ºC
Solubility in waterMiscible
CoverageApproximately 20 to 25 m² per litre of mix
Shelf lifeVirtually indefinite while sealed; 2 days once mixed
Dangerous goodsNot regulated
Poisons scheduleS5 (Caution)

Pack sizes and delivery

2.9L (sold in lots of 3), 5L Jerry Can (lots of 2), 20L Drum, 200L Drum and 1000L IBC. Freight is quoted to your postcode at checkout.

Questions
▸What is the mixing ratio for Lanotec Release Agent?

For concrete work, mix it 1:6 with water. Scaffolding, jacks and fittings take a stronger 1:4 mix.

▸How long does mixed release agent last?

Use it within 2 days of adding the water.

▸Can concrete be coated after using it?

Yes. Used to specification, a high pressure water blast is all the surface needs first, according to Lanotec.

▸Is it suitable for drinking water structures?

Lanotec lists AS 4020 certification for drinking water contact.

Safety Information

WARNING Combustible liquid (H227). Causes serious eye irritation (H319).

  • PPE: Eye protection, overalls, safety shoes and nitrile gloves for intermittent contact. A half-face respirator fitted with a Type A filter where vapour may pass the exposure standard. Wash skin after handling.
  • Handling and storage: Keep clear of heat, sparks and naked flame, and take precautions against static. Store upright and closed, somewhere cool, dry and ventilated, apart from strong oxidising agents. AS 1940 storage class: C1 combustible liquid. Keep out of children's reach.
  • First aid: Eyes: hold the lids apart and keep running water over the eye for 15 minutes or more, until a doctor or Poisons Information Centre says to stop, then see a doctor. Skin: remove soiled clothing and rinse with plenty of water. Swallowed: do not make the person vomit; rinse their mouth, offer one glass of water and get medical help. Poisons Information Centre 13 11 26.
  • Spills: Slippery. Remove ignition sources, contain and soak up with sand, soil or inert absorbent, and keep it out of drains.
  • Dangerous goods: Not regulated for transport.
  • Poisons schedule: Schedule 5 (Caution).
  • SDS: Safety Data Sheet dated 16 Sep 2022 attached to this page.
Non-DG

Lanotec Release Agent Concentrate

Pricing by Packaging Size

5L Jerry Can
AUD 135.00ex GST
AUD 148.50 inc GSTMinimum order 2: AUD 270.00 ex GST · AUD 297.00 inc GST
20L Drum
AUD 484.00ex GST
AUD 532.40 inc GST
200L Drum
AUD 4660.00ex GST
AUD 5126.00 inc GST
1000L IBC
AUD 22136.00ex GST
AUD 24349.60 inc GST
2.9L
AUD 85.00ex GST
AUD 93.50 inc GSTMinimum order 3: AUD 255.00 ex GST · AUD 280.50 inc GST

Earns a loyalty stamp

Order this product in 1000L IBC to earn 1 stamp. Collect 10 stamps for a free IBC of TW Standard, TW Premium, or Eco Wash.

Product Details
ManufacturerLanotec
Brand pageLanotec
ClassificationNon-DG
CategoryRelease Agents
Pack sizes5 options
Dispatched fromAll
Stock Status
In Stock - 1000 units
Order Options

Packaging Size

Unit priceAUD 135.00
Subtotal (2 ×)AUD 270.00

Quantity

5L Jerry Can is sold in a minimum of 2.

Delivery Information

Estimated dispatch: 7 to 10 business days after you order, depending on the site it ships from.

Freight is quoted to your postcode at checkout before you pay, with an estimated delivery date where the carrier gives one.

Reviews

What buyers say

No reviews yet - be the first.

Once a buyer leaves a review for Lanotec Release Agent Concentrate, it’ll appear here.

You might also like

Similar products from our catalog

SlipTech Asphalt Release Agent

SlipTech Asphalt Release Agent

CQVS Chemical - Release Agents

AUD 4.50/L
View
Lanotec Lano-Form Ready To Use Release Agent

Lanotec Lano-Form Ready To Use Release Agent

Lanotec - Release Agents

AUD 87.00/E
View