Citra-Force Aerosol from Lanotec puts a citrus degreaser in a 300 g spray can for fitters and mechanics doing spot work, sold in lots of 6 cans.

What it does

A spray can reaches grime a bucket cannot: a greasy joint, a fitting behind a bracket, the inside of a rim. Lanotec's use list for Citra-Force covers grease, carbon, bitumen, adhesives, ink and permanent marker. The liquid is clear orange with a citrus smell. Carbon dioxide drives the spray, and Lanotec's SDS classifies the pressurised can as the hazard, not the cleaner inside.

Where to use it

Hand tools, fittings and small parts on the bench, foam and recyclable filters, and bitumen spots or glue on hard surfaces. It suits service vans and utes, where a drum is not practical. For floors, wash down and parts washers, order the bulk Lanotec Citra-Force Citrus Degreaser instead, or browse our other degreasers.

How to use

1. Work in a well ventilated spot and keep the spray away from your face.
2. Spray onto the dirty area in short bursts.
3. Loosen heavy build up with a brush or rag.
4. Wipe it off, or rinse with water, since the liquid mixes with water.
5. Store the can cool and shaded. Never pierce or burn it, even empty.

Safe on / avoid

Suits metal tools, parts and hard workshop surfaces. Try it on a hidden patch of any rubber, plastic or paintwork first. Hold the nozzle back from skin and eyes, because liquid straight from the can is cold enough to cause freeze burns. Keep cans under 50 °C and apart from oxidising agents. Read the Safety Data Sheet before use.

Specifications

Pack sizes and delivery

Freight is quoted to your postcode at checkout. The 300g aerosol is sold in lots of 6. Dangerous goods freight applies.