Lanotec General Purpose Liquid Lanolin Aerosol frees stuck parts, stops squeaks and guards tools from rust in a 300 g can, packed 6 to a carton.

What it does

General Purpose is Lanotec's all rounder: penetrant, lubricant, corrosion inhibitor and rejuvenator. On rusted threads or a stiff hinge it works in, frees the part and leaves a lanolin film that resists moisture, salt and acid. At the drill press it lowers friction and heat, which slows wear on bits and blades, and it revives faded powder coat, fibreglass, leather, rubber, plastic and vinyl. Lanotec lists a 70 kV dry test (non conductive), no heavy metals on chemical analysis, HACCP Australia food grade lubricant accreditation and NZFSA approval C12.

Where to use it

Hinges, locks, zips, wheels, bike chains, garden gear, power tools and seized bolts. Drill bits, hole saws, blades and grinding discs. Battery terminals, switchgear, connectors, circuit boards and air conditioner parts. Fittings on vehicles, boats and caravans, and stored firearms. For plant servicing, Lanotec General Purpose Liquid Lanolin runs from trigger packs to 200 L drums. See the coolants and lubricants range.

How to use

1. Shake well, and longer in the cold.
2. Spray the part, including metal that has begun to rust, to stop it spreading.
3. Let it soak in, then wipe off the excess.
4. Keep voltage, flame and ignition sources away for roughly an hour, until the solvent has evaporated.

Safe on / avoid

Rubber, plastic, vinyl and leather are all listed as suitable, and electrical gear can be sprayed provided it dries before use. Spray straight from the can can cause freeze burns, so never point it at skin or eyes. Keep the can below 50°C and out of the sun, and do not puncture or burn it. Read the Safety Data Sheet before use.

Specifications

Pack sizes and delivery

300g aerosol, sold in lots of 6 cans. Freight is quoted to your postcode at checkout. Dangerous goods freight applies.